Description 

  GS-LI/B Low-intensity Single Aviation Obstruction Light,Base with high intensity aviation aluminum casting, fully sealed structure; Light source adopt with independent research and development dedicated LED chip, which have the specific of high light intensity ,low power consumption and long service life; Lampshade adopt with PC material, it can resist corrosion, anti-UV, anti-shock; management circuit with strong lightning protection and with the surge protection device, which can adopt to extremely bad working environment. This lamp with photoswitch, it can turn on when light intensity less than 50LUX, and turn off when above 50Lux.

Specification

Function&Features

1,Adopts Fresnel lens PC lamp shade ,converging angle meets FAA standard

2,With automatically light control function that can change to working mode at rainy day and night.

3,LED light source, its service life can up to 100000hours.

4,Low voltage design, high safety degree for using.

5,With the impact resistance, anti lightning, resistant to sunlight, anti snow, can resist typhoons, hail and other severe weather

6,With over-current protection function.

7,Possess lightning protection function.

8,It can be added warning function at dry contact.

9,It contains switch for changing flashing light and steady light.

10,No radio frequency (rf), no electromagnetic interference.

Usage notice

1,Don't use any out of nominal voltage,otherwise will destroy the equipment.

2,Do not open it if the device is out of operation, in order not to be hurt by the internal high pressure. 

3,After finished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tightened. 

4,Non-professional workers can not do the device maintenance, in order not to expand the error and be hurt. 

Application

Block

Airport

High mast lamp

Chimney

Bridge

Iron tower

Telecom towers

High-rise building